WIP - "any" by Catherine3678a

catherine3678a · December 26th, 2010, 02:14 PM

Okay ... I will post in here some of my WIP projects that look like they might actually finish one day.

Have started on the bridge ... more later.

Here's a peek at a Klingon Beard ... n.b. textures will be different.

gmd3d · December 26th, 2010, 02:17 PM

great good start. I like the additional information you have in the image.

Darrell Lawrence · December 26th, 2010, 06:27 PM

...hmmm Klingons. You want to take my Poser 4 Klingon stuff and update them to whatever you are using?

catherine3678a · December 26th, 2010, 09:14 PM

Quote:

Originally Posted by Taranis

great good start. I like the additional information you have in the image.

Thank you ...

catherine3678a · December 26th, 2010, 09:17 PM

Quote:

Originally Posted by Warrior

...hmmm Klingons. You want to take my Poser 4 Klingon stuff and update them to whatever you are using?

I haven't combed the download area (yet) ... are they uploaded there? I might be interested.

And if anybody has a great big Klingon Ship to put this bridge into that would be cool too.

gmd3d · December 27th, 2010, 02:55 AM

Quote:

Originally Posted by catherine3678a

I haven't combed the download area (yet) ... are they uploaded there? I might be interested.

And if anybody has a great big Klingon Ship to put this bridge into that would be cool too.

there is a Klingon battle cruiser in the downloads area. Star Trek / Non-Federation area .. its the TOS design (

) we don´t have TMP version at the
moment.

but the bridge would be suited to the D7 design

catherine3678a · December 27th, 2010, 07:29 AM

Quote:

Originally Posted by Taranis

there is a Klingon battle cruiser in the downloads area. Star Trek / Non-Federation area .. its the TOS design (

) we don´t have TMP version at the
moment.

but the bridge would be suited to the D7 design

Well then we'd need a Klingon Ship of the D7 design!

No rush, ... bridge can fly alone right?! hehehe ...

The first bridge I created from scratch was for a much smaller craft ... but when I went to put it in the available craft, the ship was so full of faces etc inside that there was no room! And in removing obstacles, well, they were holding the ship together apparently ... "poof"! No phasers even! As that particularly bridge had to integrated in with the ship's hull ... project was scrapped for the time being.

So, this time ... working with your bridge ... trusting that if/when/somehow there may be a ship to put it in ... but if not that's okay too 'cause it has walls! And who knows ... maybe by the time I'm finished I will have figured out how to build a few more walls etc.

.......

"They are Watching 0-0"

Darrell Lawrence · December 27th, 2010, 07:38 AM

The battlecruiser in the Downloads is a D7

gmd3d · December 27th, 2010, 07:56 AM

Quote:

Originally Posted by catherine3678a

Well then we'd need a Klingon Ship of the D7 design!

No rush, ... bridge can fly alone right?! hehehe ...

The first bridge I created from scratch was for a much smaller craft ... but when I went to put it in the available craft, the ship was so full of faces etc inside that there was no room! And in removing obstacles, well, they were holding the ship together apparently ... "poof"! No phasers even! As that particularly bridge had to integrated in with the ship's hull ... project was scrapped for the time being.

So, this time ... working with your bridge ... trusting that if/when/somehow there may be a ship to put it in ... but if not that's okay too 'cause it has walls! And who knows ... maybe by the time I'm finished I will have figured out how to build a few more walls etc.

.......

"They are Watching 0-0"

my thinking is all you have to do is redress the bridge to make it fit in with the D7.. perhaps lighter shades and add some of those partitions that is seen in the TOS .. I can make some changes if you want to give it a TOS feel ..

catherine3678a · December 28th, 2010, 08:03 AM

Quote:

Originally Posted by Warrior

The battlecruiser in the Downloads is a D7

lwo?

Well, I downloaded it ... will see if anything I have can open it. I did manage to get one lwo item opened and converted to an object ... rather interesting looking mess in the middle of the corridor ... I rather doubt was there in the original version.

gmd3d · December 28th, 2010, 08:07 AM

I will see if I can convert it for you to obj format asap once Warrior gives me the go ahead

.. if that's any help

catherine3678a · December 28th, 2010, 08:07 AM

Quote:

Originally Posted by Taranis

my thinking is all you have to do is redress the bridge to make it fit in with the D7.. perhaps lighter shades and add some of those partitions that is seen in the TOS .. I can make some changes if you want to give it a TOS feel ..

Sounds good ...

first change ... an object please!
Corridor object would be nice too ... mine didn't look so good.

......

Okay ... I'm working on the other computer for the rest of the day ... Bridge time!!!

[and wait 'til you all see the story line ....]

catherine3678a · December 28th, 2010, 08:08 AM

Quote:

Originally Posted by Taranis

I will see if I can convert it for you to obj format asap once Warrior gives me the go ahead

.. if that's any help

Our posts crossed! Yes thank you ....

gmd3d · December 28th, 2010, 08:10 AM

I will have a look and see if I can look at the KB in a day or so .. I will also see if I can change the textures to make it look more TOSish ..

bare with me I have a ton of modeling that I am doing ,, but I promises to get it to you. if I look like I am taking to long, give me a nudge

catherine3678a · December 28th, 2010, 08:21 AM

Quote:

Originally Posted by Taranis

I will have a look and see if I can look at the KB in a day or so .. I will also see if I can change the textures to make it look more TOSish ..

bare with me I have a ton of modeling that I am doing ,, but I promises to get it to you. if I look like I am taking to long, give me a nudge

Okay thanks!

Well at the rate I'm working this, hopefully by the end of January I'll have the bridge ready. For myself, no need to worry about the textures ... I'm "Aquarius", "Queen of Aquarius" ... read somewhere that the ships had either a green tinge or purple ... yet so many choose green ... think you know where I'm headed ... PURPLE. Yes.

All the best,
C.

gmd3d · December 28th, 2010, 08:35 AM

good enough .. glad to help ...... you might have now seen that these bridges and sets are version one ....... Version 2 are in the plans for the new year...

as we have a great internal set designer dropping in and giving me some ideas and direction that I did not have before....

expect better things in 2011

Darrell Lawrence · December 28th, 2010, 08:36 AM

Actually, I was converting it while you two were posting LOL

It's uploaded. You may need to rotate it. Lemme know if there are any errors or such.

gmd3d · December 28th, 2010, 08:41 AM

Quote:

Originally Posted by Warrior

Actually, I was converting it while you two were posting LOL

It's uploaded. You may need to rotate it. Lemme know if there are any errors or such.

cool ..... now that´s a service

catherine3678a · December 28th, 2010, 11:47 AM

Quote:

Originally Posted by Warrior

Actually, I was converting it while you two were posting LOL

It's uploaded. You may need to rotate it. Lemme know if there are any errors or such.

WooHoo! Thank You!!! Got it ... and I'll give it spin :-)

catherine3678a · December 28th, 2010, 11:51 AM

Quote:

Originally Posted by Taranis

good enough .. glad to help ...... you might have now seen that these bridges and sets are version one ....... Version 2 are in the plans for the new year...

as we have a great internal set designer dropping in and giving me some ideas and direction that I did not have before....

expect better things in 2011

Yes I did notice ... that's okay ...

lol ....

gmd3d · December 28th, 2010, 11:55 AM

great ... well we all have to learn and I don´t mind been given advice either .. esp when I need it....

catherine3678a · December 28th, 2010, 07:10 PM

Okay ... here we go ... one Klingon Beard ... prop file ... and no I don't know how to get Poser to do anything except "save as" ... so it's got lights, and cameras ... and I think it had 2 grounds ... you might want to delete a few of those!

Anyhow:

http://www.sharecg.com/v/47023/view/...ingon_Beard-M3

Darrell Lawrence · December 28th, 2010, 07:26 PM

Feel free to upload it here too in the Downloads.

catherine3678a · December 28th, 2010, 08:16 PM

Quote:

Originally Posted by Warrior

Feel free to upload it here too in the Downloads.

Haven't found the upload button yet!

Darrell Lawrence · December 28th, 2010, 08:30 PM

Go to the Character category. The upload button is upper right.

Jedman67 · December 28th, 2010, 09:59 PM

Quote:

Originally Posted by Taranis

good enough .. glad to help ...... you might have now seen that these bridges and sets are version one ....... Version 2 are in the plans for the new year...

as we have a great internal set designer dropping in and giving me some ideas and direction that I did not have before....

expect better things in 2011

you mean doug? i'd suggest combing his blog should be mandatory for anyone who wants to make sets

Darrell Lawrence · December 29th, 2010, 12:01 AM

No. He means seanr.

gmd3d · December 29th, 2010, 02:47 AM

yeah sorry should have more specific, I meant Seanr

I do look through Doug pages, in fact I like the model he built of the old TOS set in a Vector Program I think and then Lightwave. but I am not sure with out going back and checking.

catherine3678a · December 29th, 2010, 09:06 AM

Oh I have got to get a bigger screen! That's one small upload button on this netbook.

I tried ... forgot a field and I gather it went nowhere ... haven't time right now to repeatedly type in info.

But I do want to mention that the file has been updated over in sharecg.com ... it's now a "clean" .pp2 file [no extra lights etc]

'til next.
C.

...

edit: okay ... your forum has different image requirements than the others I post on ... I don't have 3 sets of images for this and it won't upload the zip ... gets hung up on images.
So ... well ... hmm ... not happening today ...

catherine3678a · December 29th, 2010, 11:24 PM

Okay ... got some work done on the bridge ... loaded in the ship ... "one tiny thing happened" ... and Hexagon ate a day's work!!!

So I spent the rest of the day taking apart the ship.
It's lovely! Nice and clean inside ... Hexagon does have a problem reading all the faces 'cause I'm sure it didn't start off with quite as many, and large, holes that Hexagon claimed it had. It's been truly a fun learning item ... have filled in most of the holes one way or another ... hope you like the new roof. Has a new hood too so texturing it won't be too problematic.

And I took it to pieces! Yes ... why, so we can have some fun with this ship. You'll be able to hide parts for easier viewing inside ... blow it apart in battle, and FLY. Yes ... what I call flying ... there's this image in my mind from one of the movies in which it appeared that the BOP actually moved it's wings somehow as it was cloaking/decloaking ... and that's the option I'm hoping to make happen here.

I'm posting some pics here now too ... I'd like some feedback as to which method "those who are planning to download this" are preferring to see happen as far as the "how to put the bridge on the ship" goes.

Thanks