Looking for a few star wars 3d models

FWHS DESIGNS · May 7th, 2008, 12:50 PM

I am looking for a few 3d models for my star wars collection. There used to be a Poser C3p0 and wookie. Has anyone a link to these models or access to them?

August 27th, 2008, 05:22 PM

This is the most comprehensive listing that I've currently found.

http://www.fwhsdesigns.com/forum/ind...rb_v=viewtopic

evil_genius_180 · August 27th, 2008, 05:57 PM

pssst... that's probably the website of the person who started the thread. (look closely at the membername and that web address)

August 28th, 2008, 12:34 AM

It depends on what format you are looking for. There is a fantastic site at http://www.vanishingpoint.biz/freestuff.asp that has lots of freebies. They are in Poser format but they can be used in other applications able to import Wavefront OBJ models.

Without getting too technical, Poser almost always uses the OBJ format for the geometry of models, and other files for rigging and other information. The textures are JPG or similar files which are applied to the groups in the mesh.

I say almost always uses OBJ for geometry because some files can use what's called 'internal' geometry where the geometry information is stored inside another file format which contains additional information as well as the geometry. There are free tools that allow you to strip the geometry out to a separate OBJ file though. Take a look through the forums at http://www.renderosity.com for more information.

FWHS, I know that your link below shows Vanishing Point as a resource for Star Wars stuff. I wanted to make the site known to others maybe looking for such models. Vanishing Point also has other sci-fi freebies such as Babylon 5, Star Trek, etc.

I'm in no way affiliated with Vanishing Point. I just happen to appreciate their generosity and good models.

UA

September 22nd, 2008, 03:35 PM

Alot have been posted in freebie section over at http://www.contentparadise.com some really nice ones.

October 2nd, 2008, 01:25 PM

I've not seen the 3po model, but i would like to get hold of that one too

ulimann644 · October 2nd, 2008, 02:14 PM

Quote:

Originally Posted by FWHS DESIGNS

I am looking for a few 3d models for my star wars collection. There used to be a Poser C3p0 and wookie. Has anyone a link to these models or access to them?

Quote:

Originally Posted by Nardi

I've not seen the 3po model, but i would like to get hold of that one too

After a longer search I´ve found two of my Low-Poly-Models in LW9-Format. I´m sure that I have the others ( inclusive C3PO and a Wookie ) anywhere too - also in some other formats

. I´ll keep a closer look on the dephts of my Harddrives this weekend and I´m looking forward to find them...

FWHS DESIGNS · October 3rd, 2008, 05:46 AM

Quote:

Originally Posted by Nardi

I've not seen the 3po model, but i would like to get hold of that one too

C3PO can be found at my site in downloads
Wookie can be found at 3dMenagerie's Web Site - Click goodies Then in 3D click poser and look for - "Very Tall Guy in a Hairy Yak Suit". It is not the greatest.

October 3rd, 2008, 04:53 PM

Thanks for the 3PO link

Does anyone know if there are any battledroids for poser? I know there is a Droideka going around somewhere (i havnt managed to find it yet, but there is a broken link on Rendorosity)

evil_genius_180 · October 3rd, 2008, 08:48 PM

Can Poser import Lightwave 5.6 format? If so, there are Battle Droids here in the downloads section in .lwo format.

gmd3d · October 4th, 2008, 03:07 AM

I have to look into this sometime for characters to populate my Buck Rogers Images

October 4th, 2008, 10:09 AM

Poser 7 can import lightwave models, but they are not rigged. Plus, they have to be assembled and this can be quite time consuming and not really worth the effort. I am quite suprised that no one seems to have created a battledroid for poser though.

Ah well!

Darrell Lawrence · October 4th, 2008, 10:17 AM

Well, all it takes is a little time and effort and you yourself can convert the LW versions over to Poser

October 4th, 2008, 10:35 AM

I know, but i simply dont have the patience. lol I prefer to just get on with the art itself.

Darrell Lawrence · October 4th, 2008, 10:57 AM

The trick to truly great art, however, is knowing how every part of it works. Additionally, when you do the art, being able to say YOU created everything in it is a source of accomplishment

evil_genius_180 · October 4th, 2008, 11:32 AM

Quote:

Originally Posted by Nardi

Poser 7 can import lightwave models, but they are not rigged. Plus, they have to be assembled and this can be quite time consuming and not really worth the effort. I am quite suprised that no one seems to have created a battledroid for poser though.

Probably because it takes a lot more time to build, assemble and rig a model than it does to simply import, assemble and rig one.

It's rough finding all the models that you want in the format you use. I know, I've tried. Sometimes you do have to import if you really want a mesh that you don't feel like building. The only battle droids I've been able to find are in Lightwave, Max and 3DS format. So, you might have to import one and convert it if you really want one.

October 4th, 2008, 12:34 PM

Most of my star wars art features post clone wars era anyway, so battle droids are not that important to me. I just wanted to try some out. I think i will just keep my eyes open for one in the future, but continue to carry on with the reliable ol' Stormtroopers

evil_genius_180 · October 5th, 2008, 12:31 AM

Ah, good ol' Stormtroopers. Whether they're the original Clones or the later (or earlier, depending on your POV) "volunteers," they're way better than any battle droids.

October 6th, 2008, 03:34 PM

Quote:

Originally Posted by Nardi

Thanks for the 3PO link

Does anyone know if there are any battledroids for poser? I know there is a Droideka going around somewhere (i havnt managed to find it yet, but there is a broken link on Rendorosity)

Here you go, several formats to choose from.

http://droideka.turbosquid.com/3d-Mo...ax/xsi/c4d/obj

gmd3d · October 6th, 2008, 04:01 PM

http://www.scifi3d.com/list.asp?intG...10&intCatID=13

try here .. its in Lightwave and its free to download ..I have gotten some meshes from here in the past

AnubisCat · October 6th, 2008, 07:49 PM

I'm actually for one called "The 'Brak Pack", for making your own Zabrak. Does anyone know where I can find this?

ulimann644 · October 7th, 2008, 11:01 AM

Finally I´ve found my Lightwave SW_Figures. ( I guess there are a few more I´ve not found yet... ) I think that´s a good reason for beginning to learn something about making skeletons and animating figures... :laugh:

evil_genius_180 · October 7th, 2008, 11:02 AM

Nice collection. Did you make those or download them?

ulimann644 · October 7th, 2008, 11:21 AM

Quote:

Originally Posted by evil_genius_180

Nice collection. Did you make those or download them?

I´ve extracted it from the PC-Game "Jedi Knights III - Jedi Academy" by myself and re-textured it with the original textures in Milkshape. After that I´ve converted it with Milkshape into LW-format. Finally I´ve loaded the meshes into LW, adjusted a few values and rendered it.

I´ve seen a rancor mesh at scifi3d and it looks original as the PC-mesh - I guess someone have had the same idea as I and has uploaded a "copyright-by-lucasart-mesh" there...

evil_genius_180 · October 7th, 2008, 11:24 AM

In that case, nice work. I've seen where other people have converted game meshes before. (specifically, a Galaxy-class)