Go Back   3D Gladiators Forums > CREATIVE BRAINS > Beyond Reality
Notices
Beyond Reality No matter what the subject - be it Sci-Fi - Fantasy or Real Life / 3D - 2D or web design - this is the place to post your finished artwork for review by the forum members!
To post art for Battlestar Galactica, go to our sister site- Colonial Fleets

Reply

 
Thread Tools
Old January 17th, 2001, 01:08 PM   #1
FAdmMinosh
Guest
 
FAdmMinosh's Avatar
 
Posts: n/a
Default TOS Shuttlecraft

While talking with Warrior the other day I asked if anyone done a TOS Shuttle for the Gladiators. Well when didn't have one, but he told me that he had one that was never finished. So I asked if I could finish it up. Warrior did 98% of the modeling (basically I just fixed a gap, added windows to the doors, and modeled the strips in.), and I did the texturing. One of the nice things about this model in the reg. All of them are textures so they can easily be swapped out to be used with another ship. Here's a couple of pictures I've rendered with it.


The shuttle Voltaire leaves the Excalibur.



The shuttle Voltaire hurries to catch up to the Excalibur as it beings to break orbit.



I also uploaded the shuttle to the repo under my name if anyone wants it.
------------------
A man's reach should exceed his grasp, for what else are the stars for.

A 3-D Gladiator
<A HREF="http://www.3dgladiators.net/" TARGET=_blank>
3D Gladiators, modeling the TOS world</A>

Visit the FAM Site!

[This message has been edited by FAdmMinosh (edited 01-17-2001).]
  Reply With Quote
Old January 17th, 2001, 01:51 PM   #2
Nayslayer
Guest
 
Nayslayer's Avatar
 
Posts: n/a
Default

Give me Give me!!!
  Reply With Quote
Old January 17th, 2001, 01:53 PM   #3
Nayslayer
Guest
 
Nayslayer's Avatar
 
Posts: n/a
Default

Oh wait I see it in the repo.
  Reply With Quote
Old January 17th, 2001, 01:57 PM   #4
Nayslayer
Guest
 
Nayslayer's Avatar
 
Posts: n/a
Default

Please tell me it's not in LW6 format. That's ok I'll convert it to LW5 format.
  Reply With Quote
Old January 17th, 2001, 02:21 PM   #5
Masao
Guest
 
Masao's Avatar
 
Posts: n/a
Default

According to this picture of the full-size mock-up, the center window is square while the outer windows are more rectangular. http://members.aol.com/IDICPage/Galileo2.html Also, the front panel (with the windows) should be recessed slightly below the sides. This pic also shows that the front of the nacelles are flat, something I never notice before (might be replacements rather than original)

This pic shows that sometimes the windows were white (possibly shutters?) http://employees.csbsju.edu/rsorense...g-finished.gif

On this page you can see that the door is the same color as the hull: white/light grey on top and darker grey beneath. The nacelles should also be darker. http://members.aol.com/WMccullars/TOSGalileo.html

For the first pic, if you showed Excalibur from the back, with on open shuttle bay (more work), it would emphasize that Votaire was leaving. Another angle that might be interesting is to show the bottom of Excalibur very large in the background.

A small nit: I think that you've written Voltaire with a small "v" rather than a capital "V."
  Reply With Quote
Old January 17th, 2001, 05:10 PM   #6
Darrell Lawrence
Formerly "Warrior"
The Last Starfighter
Owner
 
Darrell Lawrence's Avatar
 

Join Date: Jun 1999
Location: Rylos
Posts: 4,054
Default

David, I still have the 5.6 version that I sent to Minosh.

I haven't looked at his mods to it yet as I haven't DL'd it yet.

It's in 6.5 format? Ugh!

------------------
3D Gladiators Project Admin
Poser Space Cadets
Warrior of 3D Art Gallery

"If not for TOS, then there would be no Trek movies, TNG, DS9 or Voyager."

"All I ask is that you read and understand before jumping to conclusions."

"Legends never die... They just get new Captains."
Darrell Lawrence is offline   Reply With Quote
Old January 17th, 2001, 06:14 PM   #7
Nayslayer
Guest
 
Nayslayer's Avatar
 
Posts: n/a
Default

Ya 6.5 format ugh! It be great if you could send it to me. I converted FAdmMinosh's version to 5.6 but the texture's wouldn't load or even find them.
  Reply With Quote
Old January 17th, 2001, 07:23 PM   #8
FAdmMinosh
Guest
 
FAdmMinosh's Avatar
 
Posts: n/a
Default

It should be in Lightwave 6.0 (since that's what I have ) As for the textures, I used a JPG format (I forgot that I can use them via the plugin I have, sorry) I can covert them to TGA if you want them.

As for the windows, I really didn't touch them, but I can tweak them since you mentioned them. As for color, I've seen them both black and white (I perfer black myself). The door is easier fixed by setting the diffuse up ( I though it looked better darker myself ) Thanks for the pics though.

As for the Voltaire being in lower case, it was meant to be like that. If you look at the Galileo, you'll see the G is in lowercase as well (it's just a couple of font sizes bigger).

------------------
A man's reach should exceed his grasp, for what else are the stars for.

A 3-D Gladiator
<A HREF="http://www.3dgladiators.net/" TARGET=_blank>
3D Gladiators, modeling the TOS world</A>

Visit the FAM Site!
  Reply With Quote
Old January 17th, 2001, 07:50 PM   #9
Nayslayer
Guest
 
Nayslayer's Avatar
 
Posts: n/a
Default

It's not the texture format. LW is not asking for the texture's.
  Reply With Quote
Old January 17th, 2001, 10:03 PM   #10
FAdmMinosh
Guest
 
FAdmMinosh's Avatar
 
Posts: n/a
Default

Hmmmm...that's odd about the textures. Maybe one of these Lightwave master can help, since I've only ever worked with v.6 of Lightwave.

Anyhoo I rendered up a new pic with the shuttlecraft. I've played with the front windows and messed with the textures to match the photo's Masao sent (btw, I think we should just make Masao our reference guy. I spent an hour looking for reference photos for the shuttle and didn't come up with most of these good ones Masao did. He seems to have a nack for finding these ) So here's the pic...



------------------
A man's reach should exceed his grasp, for what else are the stars for.

A 3-D Gladiator
<A HREF="http://www.3dgladiators.net/" TARGET=_blank>
3D Gladiators, modeling the TOS world</A>

Visit the FAM Site!
  Reply With Quote
Old January 18th, 2001, 03:35 AM   #11
skyhawk223
Flight Instructor
 
skyhawk223's Avatar
 
Join Date: Nov 2000
Location: NY, NY
Posts: 2,216
Default

The shuttle is cool. However, the shuttlebay should probably be brighter. There weren't very many dark rooms back in the TOS day. Brighten it up a bit.

I think we need more shuttles and other smaller support craft to get a full complement of ships.
skyhawk223 is offline   Reply With Quote
Old January 18th, 2001, 07:19 AM   #12
Darrell Lawrence
Formerly "Warrior"
The Last Starfighter
Owner
 
Darrell Lawrence's Avatar
 

Join Date: Jun 1999
Location: Rylos
Posts: 4,054
Default

thomas7g did the aqua-shuttle from TAS, and meshula design a cool little suppor ship.

Now, back to my shuttle-

LW 6.0 *will* export as a 5.6 format. HOWEVER, all texturing is LOST.

Therefore, you must have both 5.6 and 6.0 (or 6.5) open, looking at the surfacing, and put the settings manually into 5.6

As ot the shutle name... heh heh... I wanted to keep in "Excalibur" mode and call it the Arthur II or Lancelot, etc

------------------
3D Gladiators Project Admin
Poser Space Cadets
Warrior of 3D Art Gallery

"If not for TOS, then there would be no Trek movies, TNG, DS9 or Voyager."

"All I ask is that you read and understand before jumping to conclusions."

"Legends never die... They just get new Captains."
Darrell Lawrence is offline   Reply With Quote
Old January 18th, 2001, 07:49 AM   #13
FAdmMinosh
Guest
 
FAdmMinosh's Avatar
 
Posts: n/a
Default

Duh!!! I didn't even think about those names, lol I'll make up a couple of new textures for it then.

------------------
A man's reach should exceed his grasp, for what else are the stars for.

A 3-D Gladiator
<A HREF="http://www.3dgladiators.net/" TARGET=_blank>
3D Gladiators, modeling the TOS world</A>

Visit the FAM Site!
  Reply With Quote
Old January 18th, 2001, 01:01 PM   #14
FAdmMinosh
Guest
 
FAdmMinosh's Avatar
 
Posts: n/a
Ok, I've uploaded the shuttlecraft with Masao's modification along with the extra textures to be able to make it the shuttlecraft Lancelot . And in response to Skyhawk's comment, I was just being lazy with the picture (I'm learning I can't do that with you all ) So in response I did some more modeling in the shuttle bay itself and made some custom textures for the floor. It's lightly modeled (i.e. just the major stuff, no recessed ladders or anything ). I used the ST, Starfleet Technical Manual for how to do the shuttlebay. Well here we go again.






------------------
A man's reach should exceed his grasp, for what else are the stars for.

A 3-D Gladiator
<A HREF="http://www.3dgladiators.net/" TARGET=_blank>
3D Gladiators, modeling the TOS world</A>

Visit the FAM Site!

[This message has been edited by FAdmMinosh (edited 01-18-2001).]
  Reply With Quote
Old January 18th, 2001, 01:58 PM   #15
Masao
Guest
 
Masao's Avatar
 
Posts: n/a
Default

There's a few standard sites for references for model builders, including the IDIC page, CultTV man, and Starship Modeler. Bernd's site also has good stuff. You can find all these sites and more on Bernd's link page.

I think your windows are stil a bit too tall. When I measured the picture linked earlier, the window height is about 26% of the total height of the front panel. Yours windows are about 37%.The space above the windows are about 15% of the total panel height. Also, this front panel still needs to be recessed below the sides.

I'm sure they're are some pictures of the shuttle leaving the shuttlebay. I'll look around. The shuttle bay is pretty white with very little markings. That shuttle looks pretty small in that big bay. Maybe you could park a few other shuttles along the back wall.

A nice beauty shot of the shuttle leaving would be the pic you posted first but with the Enterprise pointed in the opposite direction.
  Reply With Quote
Old January 18th, 2001, 02:10 PM   #16
Masao
Guest
 
Masao's Avatar
 
Posts: n/a
Default

A ha! Here's a page with pictures of the inside of the shuttle bay. This is another site on Bernd's link page called Star Trek in Sound and Vision http://www.stinsv.com/TOS/tosshipv.htm
  Reply With Quote
Old January 19th, 2001, 03:22 AM   #17
skyhawk223
Flight Instructor
 
skyhawk223's Avatar
 
Join Date: Nov 2000
Location: NY, NY
Posts: 2,216
Default

Having the interior done adds so much to the image.
skyhawk223 is offline   Reply With Quote
Old March 17th, 2001, 02:20 PM   #18
Darrell Lawrence
Formerly "Warrior"
The Last Starfighter
Owner
 
Darrell Lawrence's Avatar
 

Join Date: Jun 1999
Location: Rylos
Posts: 4,054
Default

So... like... when can I get the shuttlebay for my ship????



------------------
3D Gladiators Project Admin
Poser Space Cadets
Warrior of 3D Art Gallery

"If not for TOS, then there would be no Trek movies, TNG, DS9 or Voyager."

"All I ask is that you read and understand before jumping to conclusions."

"Legends never die... They just get new Captains."
Darrell Lawrence is offline   Reply With Quote
Old March 17th, 2001, 03:09 PM   #19
skyhawk223
Flight Instructor
 
skyhawk223's Avatar
 
Join Date: Nov 2000
Location: NY, NY
Posts: 2,216
Default

FadmMinosh, is this shuttle going to be part of the website? If so, make some 6 views and send them to Warrior. We are getting ready to go live on the site and want to have as much content as we can get. I think it would be a great addition.

Will that be released? I want to see if it will fit in my USS Hawk.
skyhawk223 is offline   Reply With Quote
Old March 17th, 2001, 04:06 PM   #20
Darrell Lawrence
Formerly "Warrior"
The Last Starfighter
Owner
 
Darrell Lawrence's Avatar
 

Join Date: Jun 1999
Location: Rylos
Posts: 4,054
Default

sky, the shuttle is mine to begin with

I can make the views for it.

What I need is that shuttlebay for my ship it was made for *L*

------------------
3D Gladiators Project Admin
Poser Space Cadets
Warrior of 3D Art Gallery

"If not for TOS, then there would be no Trek movies, TNG, DS9 or Voyager."

"All I ask is that you read and understand before jumping to conclusions."

"Legends never die... They just get new Captains."
Darrell Lawrence is offline   Reply With Quote
Old March 19th, 2001, 03:48 AM   #21
skyhawk223
Flight Instructor
 
skyhawk223's Avatar
 
Join Date: Nov 2000
Location: NY, NY
Posts: 2,216
Default

Oh, sorry dude. Should have read the first post.
skyhawk223 is offline   Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
TOS Bridge - Poser Conversion Ptrope On The Horizon 118 September 25th, 2008 06:02 AM
New TOS Homepage General Phoenix Viewer On! 7 May 1st, 2006 04:08 AM
TOS Lifeboat BJ_O Beyond Reality 1 March 26th, 2003 11:41 AM
can you say Tos bridge? scaramanga On The Horizon 10 December 24th, 2001 07:47 AM






For Fans Of CGI/Digital Art


All times are GMT -7. The time now is 11:42 AM. Contact Us - 3D Gladiators - Archive - Privacy Statement - Top
Powered by: vBulletin Version 3.8.11 Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content and Graphics ©1999-2010 3DGladiators
The 3D Gladiators Forums are run by CGI/Digital Art fans, paid for by CGI/Digital Art fans, for the enjoyment of fellow CGI/Digital Art fans.



©1999-2005 3D Gladiators